Some values come from no device: the average over three rooms, a setpoint, the position of the sun or the power price of the next hour. Virtual sensors and external data bring them into HydroNode, with charts, widgets and automations like any other sensor.
Virtual sensors
+SensorVirtual sensor adds a sensor without a device. Its inputs are the data points of its data pool, including the ones that come through links. It holds three kinds of values:
Formulas
Inputs are named a to h. Numbers, +, -, *, /, parentheses and min, max, avg, abs, round are allowed. A missing input, or one older than allowed, gives no value for that moment, never 0. The form shows the result live, and new computed values are calculated back over the history.
kind: FORMULA
inputs: a = Bed 1 temperature, b = Bed 2 temperature
expression: round((a + b) / 2, 1)External data
| Source | Values |
|---|---|
| Sun | Elevation, azimuth, daylight, minutes to sunrise and sunset. Calculated by HydroNode. |
| Power price | Price now, in one hour, lowest and highest of the day in ct/kWh, day-ahead for DE-LU and AT. |
| Weather | Temperature, humidity, pressure, wind, cloud cover, UV, rain in the next hour. Forecast from MET Norway. |
One source per data pool, at the project's location or a place you pick. External sensors do not count toward your 20 sensors and have no anomaly detection and no offline alerts.
Examples
- The pump runs only while Price now is below a value.
- The window closes when Rain next hour rises above zero.
- The average of three greenhouse sensors as one station on the map.
Where to go next
- Virtual sensors and external data in the docs.
- Rules on top: Automations with data rules, Discord and webhooks.

