AI apps with MCP
Ask Claude, ChatGPT, Cursor or VS Code about your sensors in plain words. "How warm did the greenhouse get this week?" "Why is the cellar sensor offline?" "Turn the pump off." The app talks to HydroNode through the hosted MCP server. You decide what it may see and do.
Add the server URL
https://hydronode.tech/mcp
| App | Where |
|---|---|
| Claude (web, desktop, phone) | Settings › Connectors › Add custom connector, paste the URL |
| Claude plugin (connector and skills) | Claude Desktop: add the plugin marketplace TexhFexLabs/hydronode-skills and install hydronode. Claude Code: claude plugin marketplace add TexhFexLabs/hydronode-skills, then claude plugin install hydronode@hydronode |
| Claude Code | claude mcp add --transport http hydronode https://hydronode.tech/mcp |
| ChatGPT | Settings › Connectors › Create, paste the URL, authentication OAuth |
| Cursor | Use the Add to Cursor card above, or Settings › MCP › Add new MCP server, type HTTP, paste the URL |
| VS Code | Use the Install in VS Code card above, or Command palette › MCP: Add Server › HTTP, paste the URL |
| Codex | Add [mcp_servers.hydronode] with url = "https://hydronode.tech/mcp" in ~/.codex/config.toml |
| Apps that only start local servers | Use the bridge npx -y mcp-remote https://hydronode.tech/mcp as the command (needs Node.js) |
The app opens HydroNode in your browser. Sign in if you are not, then choose what it may do. Nothing to copy, no token: the app gets its own key, and you can take it back at any time.
Choose what it may do and see
- Read is always on: sensors, current values, summaries of the history, anomalies, messages and automations.
- Switch and send commands lets it set outputs, send commands, log values, mark messages and turn automations on or off.
- Create and change automations lets it write rules that notify you, use your channels, set data points or send command templates. Never webhooks: no data leaves for an address the app picked.
- Projects: all of them, or only the ones you tick. The app sees nothing outside them.
Giving an app write access or automations asks you to sign in again if your last sign-in is older than five minutes. Apps HydroNode does not know are marked Unverified app. Only allow those if you started the connection yourself.
What to ask
- What needs my attention today?
- How warm did the greenhouse get this week, and when?
- Was the soil below 30 % moisture in the last 7 days? For how long?
- Compare this week with last week for the cellar humidity.
- Why is the balcony sensor offline?
- Turn the pump off and tell me when the device confirms.
- Send me a push when the water tank drops below 20 cm.
Answers come from hourly and 5 minute summaries, never thousands of raw readings. The app asks you before it switches anything, the same way it asks before any other action.
| Tool | What it does |
|---|---|
overview | Projects, device status, open anomalies, unread messages, what needs attention |
find | Sensors, data points, stations and projects by name |
get_sensor | One sensor with its current values |
summarize_history | Min, max, mean, trend and gaps over a time span |
find_periods | When a value was below or above a line, and for how long |
compare | Up to four values side by side, or a span against an earlier one |
list_anomalies, get_anomaly | Anomalies with the explanation |
list_messages, mark_messages | Your messages, read or archive them |
device_health, console | Devices with a problem, the latest requests and why they were rejected |
public_stations | Public stations near a place |
set_value, send_command, log_value | Switch, send a command, log a manual value (write access) |
list_automations, toggle_automation, create_automation | Automations, pause or add one (create needs its own box) |
Edit access or revoke
Account › Sessions & security › Connected apps lists every connected app with what it may do and when it was last used. Edit access changes the boxes and projects, the next question already uses them. Revoke ends the connection right away. When an app tries to switch without write access, it tells you and links to this page.
How it is kept safe
- The app never sees your password or your HydroNode session. It gets a key that only works through the MCP server.
- The key can only read and do what you allowed, in the projects you chose. No secrets, no deleting, no sharing, no account settings, no firmware updates.
- Every switch and command the app sends shows up in the device console with the app's name.
- Too many requests are slowed down: 120 reads and 20 changes per minute.
Prefer the terminal? The HydroNode CLI does the same and more.